| The Safrane.Info Forum! http://www.safrane.info/forum/ |
|
| Project: Hiding the wood http://www.safrane.info/forum/viewtopic.php?f=16&t=89 |
Page 2 of 3 |
| Author: | Lee [ Fri Jun 08, 2012 5:07 pm ] |
| Post subject: | Re: Project: Hiding the wood |
Took some pics... Attachment: IMAG0036.jpg Attachment: IMAG0037.jpg Attachment: IMAG0035.jpg
|
|
| Author: | SAFRANEV6RXE [ Fri Jun 08, 2012 6:44 pm ] |
| Post subject: | Re: Project: Hiding the wood |
The wood does look much better highly polished as Baccara style. I want to do this to mine,i,ve actually got the Baccara wooden radio cover,filler panel and ashtray,got a few pics but will get someone to post them for me maybe! |
|
| Author: | SAFRANEV6RXE [ Fri Jun 08, 2012 6:45 pm ] |
| Post subject: | Re: Project: Hiding the wood |
Forgot to say Are phase 2 wood just clipped on?,i,am sure Phase 1 is bolted on,so you have to remove all the doorcards? |
|
| Author: | Lee [ Fri Jun 08, 2012 7:04 pm ] |
| Post subject: | Re: Project: Hiding the wood |
Hi there, it was a long time ago when i took all the pieces out to polish them, but i do remember i removed just a couple of pieces at a time to work on but most of them are screwed on so the door cards have to be removed. Only the pieces forward of the front door handles were held on by one screw at the front. Lee |
|
| Author: | Safrane610 [ Fri Jun 08, 2012 7:28 pm ] |
| Post subject: | Re: Project: Hiding the wood |
That is correct. Most is bolted on. However, I found there was no real need to take everything off. I did mine 'in situ' and the results are the same. If anything, it is actually easier to work on the bits when they are held in place. A nice tidy looking car you have there Lee. Obviously a late car. Do tell us more about you and the car! 
|
|
| Author: | Saffles [ Sat Jun 09, 2012 12:43 pm ] |
| Post subject: | Re: Project: Hiding the wood |
SAFRANEV6RXE wrote: got a few pics but will get someone to post them for me maybe! SAFRANEV6RXE sent these to me this morning:   These are Baccara panels I *think* fitted to his V6 ph1 safrane. I'm sure SAFRANEV6RXE will be able to tell you more! |
|
| Author: | SAFRANEV6RXE [ Sun Jun 10, 2012 1:15 pm ] |
| Post subject: | Re: Project: Hiding the wood |
Yes theses are genuine Baccara wooden trims,they are all real wood and are all bolted onto the panels,not glued or clipped on,you have to remove the whole centre console to replace the radio flap,the rest take seconds to change but the console is a pain. |
|
| Author: | Lee [ Sun Jun 10, 2012 2:28 pm ] |
| Post subject: | Re: Project: Hiding the wood |
Hi there, the existing 'plastic' wood would certainly need to be polished to a high gloss to try and match the real stuff! Certainly worth it though. Lee |
|
| Author: | Chris H [ Sun Jun 17, 2012 8:40 am ] |
| Post subject: | Re: Project: Hiding the wood |
I have always thought the biggest mistake they made for the bi-tyrbo etc was to puyt even more wood in the car. I think it looks horrific. |
|
| Author: | SAFRANEV6RXE [ Tue Aug 28, 2012 9:15 pm ] |
| Post subject: | Re: Project: Hiding the wood |
Just given a spare set of wood to our bodyshop to spray with clear laquer,hopefully they will return looking good? |
|
| Page 2 of 3 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|